方方
,
张晶
,
朱健
,
陈国荣
,
孙大林
,
C. M. Jensen
金属学报
doi:10.3321/j.issn:0412-1961.2007.01.018
采用同步X射线衍射、扫描电镜及颗粒度分析研究了NaAlH4分解后的加氢过程.结果表明,催化剂Ti不仅可以降低NaAlH4的分解温度,也可以将Na3AlH6的分解温度从250℃降至160℃左右.NaAlH4分解后的加氢反应理论上是可逆的,但由于分解后的产物NaH和Al相互分离,尤其是由于聚集所形成的Al颗粒过大,造成Na3AlH6不能全部转变成NaAlH4.这也是导致在随后的吸、放氢循环过程中有效贮氢量降低的原因.进一步的实验表明,当聚集的Al颗粒平均尺寸大于2.3 μm时,便不利于加氢过程的完全进行.
关键词:
贮氢材料
,
NaAlH4
,
加氢反应
Materials Science and Technology
The relationship between degeneration of the primary M7C3 carbide and precipitation of the secondary M23C6 carbide has been investigated in a cobalt base superalloy after 100 h aging at 850 degrees C. The results indicated that the primary M7C3 carbide could not transform in situ into the secondary M23C6 carbide. The M23C6 formed by a direct reaction between chromium and carbon atoms. The dissolution of M7C3 provided the precipitation of M23C6 with essential carbon, which acted as a carbon reservoir. Near M7C3, the chromium content is a controlling factor of M23C6 precipitation while away from it, the carbon content dominated the reaction. The precipitate free zone around M7C3 is attributed to chromium depletion which is inherited from the as cast condition. MST/4174
关键词:
Naqiong Zhu
材料科学技术（英）
Three-dimensional atom probe (3DAP) technique has been used to study the nucleation and growth of M23C6 carbide in a supersaturated multi-component Fe-based alloy aged at 800°C. 3D images indicate that the radius of M23C6 carbide after ageing for 10 min is about 9 nm. Concentration profiles of alloy elements in the carbide are also obtained. Combined with PANDAT and Thermo-Calc software, attempts to model the early stages of precipitation are present. The calculated particle size and composition of M23C6 carbide is in good agreement with 3DAP data.
关键词:
Nucleation and growth
LI Yuqing WANG Cirong GU Zhaofeng Research Institute of Daye Steel Works
,
Huangshi
,
China Senior Engineer
,
Research Institute of Daye Steel Works
,
Huangshi 435001
,
China
金属学报(英文版)
Determination of(Fe,Cr)_7C_3 in Cr27 cast iron results about 30 v.-%.Minor Si and Mn are present.Sectional area of the M_7C_3 grains is 1—50μm~2.Combining matrix analysis of elec- tron diffraction pattern with calculated angle between plane traces,{011}twins and also {013}twins producing local environment for Ru_7B_3 are observed in the orthorhombic M_7C_3. A crystallographic model for M_7C_3 is proposed.
关键词:
cast iron
,
null
,
null
,
null
,
null
刘勤
,
夏锄
,
刘晓东
金属学报
在170,190,210,230,250℃的温度下,采用3.7×10~2,7.4×10~2和1.1×10~(-1)min(-1)的应变速率(平均)对Zn-5%Al共晶合金的m-C-δ(或m-k-δ)关系曲线(简称m-δ关系曲线)进行了测定.所有的曲线均随应变的δ增加而快速上升.俟达到某一定的应变量(极限应变量δ1)后。开始缓慢下降并保持平稳直至断裂.Zn-5%A1共晶合金的m-δ关系曲线不存在k_(?)=k_I(k_(I 1),k_(I 2),k_(I 3),……)=k_F(或C_0=C_I(C_(I 1),C_(I 2),C_(I 3),……)=C_F=1)的简单情况.可应用m-δ方程式[4,5]对曲线上各点C值(包括所有的C_I和C_F值)进行计算.C值随δ值的增加成近似的直线上升.直线的斜率在极限应变(δ1)处突然减小.
关键词:
沈海军
功能材料
采用基于Tersoff势的分子动力学方法,模拟了温度T=300、700和1100K下C60、M@C60(M=Si,Ge)富勒烯分子的对径压缩过程.根据模拟结果,讨论了温度T对3种富勒烯分子压缩力学特性的影响以及它们压缩力学特性的差异.研究表明,在300～1100K范围内,温度T对C60、M@C60(M=Si,Ge)分子压缩力学特性无显著影响;当压缩应变至8%～16%左右,各富勒烯分子在加载点处开始"塌陷",当压缩应变至28%～32%左右,各富勒烯达到承载极限;C60、Si@C60、Ge@C60分子依次具有由低到高的承载能力.
关键词:
富勒烯
,
分子动力学
,
力学特性
,
内嵌M@C60富勒烯
ZHU Na-qiong
,
LU Li
,
HE Yan-lin
,
LI Lin
,
LU Xiao-gang
钢铁研究学报(英文版)
Coarsening of M23C6 precipitates in an Fe-12.4Cr-0.13C ternary alloy has been investigated ageing at 780 ℃ up to 200 h. Evolution of M23C6 carbides at different ageing times was determined experimentally using transmission electron microscopy. Particle size distribution was obtained with different measuring methods. Simulations of coarsening of M23C6 precipitates were carried out using computational thermodynamics and kinetics. Results showed low coarsening rates for M23C6 precipitates in the Fe-Cr-C ternary alloy. Interfacial energy of M23C6/ferrite interface is between 0.1 and 0.3 J·m-2 for the coarsening of M23C6 ageing at 780 ℃.
关键词:
M23C6
,
coarsening
,
PSD
,
interfacial energy
Materials Letters
Secondary M,C precipitation was investigated in K40S cobalt-base alloy after 100 h aging at 950 degreesC. The results showed that it was closely related to the tungsten-rich zones inherited from the as-cast condition and the degeneration of the primary M7C3 carbide. A direct element reaction, 6M + C --> M6C, in which C comes from the decomposition of the M7C3 carbides, is suggested as the mechanism of secondary M6C precipitation in K40S alloy. (C) 2001 Elsevier Science B.V. All rights reserved.
关键词:
M6C precipitation;aging;M7C3 carbide;superalloy
W.H. Jiang
,
X.D. Yao
,
H.R. Guan and Z.Q. Hu(1) Department of Superalloys
,
Institute of Metal Research
,
The Chinese Academy of Sciences
,
Shenyang 110015
,
China2) Department of Metal Materials Engineering
,
Shenyang Polytechnic University) Shenyang 110023
,
China )Manuscript received in revised form 11 September 1998
金属学报(英文版)
Secondary M23C6 precipitation around primary MC carbide in a directionally solidified cobalt-base saperalloy was investigated duriny aging at 850℃. The results show that it was closely related to the decomposition of the MC. Two mechanisms were suggested,i.e. the in situ reaction, MC+γ→M23C6+C, and the direct reaction, M+C→M23C6,in which MC acted as a carbon source.
关键词:
cobalt-base superalloy
,
null
,
null
,
null
